Compliances Available
Compliance support that can travel with the quotation
We keep this practical: what can be shared, reviewed or coordinated depends on the material route, grade, source and test scope.
ISO Certificate
ISO 9001:2015 certified quality management system
The certificate is available for purchase, QC and vendor-onboarding teams that need to confirm supplier credentials before RFQ or vendor record creation.
Certificate no.E20250728630
ScopeImport, export, stockholding, cutting and distribution
MaterialsNickel, cobalt, stainless steel, alloy steel and related alloys
FormsBars, rods, sheets, plates, tubes, pipes, forgings and powders
QMSISO 9001:2015Certified quality management system for import, export, stockholding, cutting and distribution of alloy materials.
MTCEN 10204 3.1Mill Test Certificate support where scoped, with heat number, grade, chemistry, mechanicals and condition review.
SpecsASTM / ASME / NACE / APISpecification review for common nickel, cobalt, duplex and super duplex requirements before quote finalisation.
TPIInspection coordinationPMI, hardness, ferrite, NDE, corrosion testing and client-nominated TPI reviewed when included in RFQ scope.
| Compliance item | Available support | Buyer detail |
|---|---|---|
| ISO certificate | ISO 9001:2015 certificate, certificate number E20250728630 and company profile for vendor onboarding. | Shared with active enquiries and vendor documentation. |
| Material certificate | EN 10204 3.1 MTC where the supply source and material scope support it. | MTC must match grade, heat number, condition and physical marking. |
| Grade standards | ASTM / ASME / UNS / EN / API / NACE references reviewed against the enquiry. | Final compliance depends on the exact grade, form, condition and test requirement. |
| Testing | PMI, hardness, ferrite, UT, DP/MPI, impact or corrosion testing can be coordinated by scope. | Testing should be included before PO release because it affects cost and delivery. |
| TPI bodies | Lloyd's, BV, DNV, TUV, IRS and other nominated agencies can be reviewed. | Agency, location, hold point and charges are confirmed before dispatch planning. |
Supply Routes
Four practical ways we support requirements
The right route depends on whether the material is standard, cut-size, project-controlled, test-heavy or made to a drawing/specification.
01Stock and cut-sizeFor grades and forms available in stock or standard lengths, including smaller cut pieces where the parent material supports the requirement.
02Source-arranged supplyFor non-stock sizes, alternate forms or urgent project needs where suitable certified material can be arranged from approved channels.
03Mill indentFor larger quantities, controlled conditions, special sizes, export scope or documentation requirements that need mill-level planning.
04Made to orderFor drawings, special tolerances, hardfacing consumables, powders, forgings, test scope or project-specific supply packs.
| Route | Best fit | What we confirm |
|---|---|---|
| Available stock | Standard bars, rods, sheets, plates, tubes or pipes in common grades and sizes. | Heat number, certificate availability, exact size, weight, cutting allowance and dispatch timeline. |
| Cut piece / cut length | Prototype, repair, urgent maintenance, small-batch production or trial quantity. | Minimum cut size, usable balance, tolerance, packing, marking and document traceability. |
| Source-arranged | Requirement is clear, but the exact item is not in our immediate stock position. | Grade, form, source certificate, lead time, commercial basis and whether additional testing is needed. |
| Mill indent | Project quantity, non-standard size, controlled condition, export, or stricter document scope. | MOQ, production lead time, mill route, inspection stage, payment schedule and dispatch plan. |
| Made to order | Forgings, powders, hardfacing forms, unusual dimensions, special testing or customer drawings. | Drawing/spec review, acceptance criteria, process feasibility, test scope and quoted validity. |
| Dispatch support | Pan-India supply from the Nashik supply desk; export enquiries reviewed by destination. | Delivery city, packing, transport mode, GST state, export documents and Incoterm where applicable. |
Capabilities
Materials, forms and applications we understand
We are strongest where material grade, condition, certificate and application cannot be treated casually.
Material families
Nickel superalloys, cobalt alloys, duplex and super duplex stainless steels, stainless steel, alloy steel and related critical materials for valve, oil & gas, energy, process, marine and OEM applications.
Supply forms
Round bars, flat bars, rods, sheets, plates, tubes, pipes, forgings, powders and hardfacing-related forms. Availability depends on grade, size, condition, standard and document scope.
Nickel alloys
- Inconel 718, 625, 825
- Hastelloy C276 and X
- Monel 400 and K500
- ASTM / ASME / NACE review
Cobalt alloys
- Stellite 6, 12 and 21
- Rods, powders and wear-facing forms
- Valve trim and hardfacing applications
- Hardness and application-fit review
Duplex grades
- Duplex 2205
- Super Duplex 2507
- Zeron 100
- PREN, ferrite and corrosion-test scope where specified
RFQ Details
What helps us quote accurately
A few clear details let us choose the right supply route, not just send a generic alloy rate.
Grade / UNSInconel 718 / UNS N07718, Hastelloy C276, Stellite 6, Duplex 2205, Super Duplex 2507.
Product formRound bar, flat bar, sheet, plate, rod, tube, pipe, forging, wire, powder or drawing-based part.
Size detailsDiameter, thickness, width, length, OD/ID, schedule, cut length, tolerance and machining allowance.
QuantityPieces, kilograms, meters, full length, sheet/plate count, project lot or repeat schedule.
StandardASTM, ASME, EN, DIN, NACE MR0175, API 6A, AMS or customer/project specification.
ConditionAnnealed, solution annealed, aged, double-aged, hardened, cold worked or customer-defined.
TestingPMI, hardness, UT, DP, ferrite, impact, corrosion, NDE or project-specific test scope.
DeliveryDispatch city, target date, urgency, GST state, packing needs and export destination if relevant.
Documents & Inspection
Material travels with the right paperwork
For critical alloys, the MTC, heat number, marking, packing list and invoice are aligned to the same material record.
Standard dispatch pack
- Tax invoice
- Packing list
- EN 10204 3.1 MTC when scoped
- Heat number and marking reference
- E-way bill where applicable
Testing support
- PMI / hardness
- UT / DP / MPI where scoped
- Ferrite and PREN review
- Impact or corrosion testing
- Customer-specific reports
TPI coordination
- Client-nominated agency review
- Lloyd's, BV, DNV, TUV, IRS subject to scope
- Witness point and location planning
- Charges and lead time clarified before dispatch
Commercial & Vendor Pack
Practical details for purchase and accounts
Vendor documentation and commercial terms are shared against active enquiries and aligned to the selected supply route.
Commercial basis
- Material, cutting and testing separated where needed
- Freight and packing stated by scope
- Quote validity tied to availability
- GST and delivery basis clarified
Payment terms
- Advance against PI as standard
- LC or project terms reviewed case by case
- Credit terms only after approval
- Indent terms depend on source and value
Vendor documents
- GST, PAN and IEC
- MSME / UDYAM where applicable
- Bank details
- ISO 9001 certificate and company profile
Addresses
- Registered office: Andheri W, Mumbai
- Operations / supply desk: Nashik
- Pan-India dispatch support
- Export enquiries reviewed by destination
Send the requirement on WhatsApp
Share grade, form, size, quantity, standard, document scope and delivery city. Drawings and customer specs help for made-to-order items.
Download the capability brochure
Two-page overview for vendor onboarding, internal circulation and purchase review.